Product Overview
The Impact D18 Nitrile Sandy TPR Waterproof Glove is a sophisticated piece of personal protective equipment designed for the most demanding physical environments. It successfully bridges the gap between high-level mechanical protection and the practical need for dexterity and environmental resistance. By combining a Level D cut-resistant liner with a comprehensive waterproof barrier, this glove ensures that professionals can work confidently in wet, oily, and high-risk conditions without compromising on safety or comfort.
Key Features
- Level D Cut Resistance: The liner is engineered using a high-performance blend of HPPE, steel, and glass fibres, providing a robust shield against sharp edges and laceration hazards.
- Bonded TPR Pods: These impact-absorbing pods are bonded directly to the fabric rather than stitched, allowing for natural hand movement and reducing the internal friction points found in traditional impact gloves.
- Fully Dipped Nitrile Coating: The complete nitrile dip acts as an impenetrable barrier against water and liquids, keeping hands dry during prolonged exposure to moisture.
- Sandy Grip Finish: This textured surface provides exceptional traction and control when handling tools in oily or wet environments, reducing the risk of accidental slips.
- Reinforced Thumb Crotch: Extra material at this primary wear point significantly enhances the durability and lifespan of the glove in heavy-use scenarios.
- Touchscreen Compatibility: Designed to work with most digital interfaces, allowing workers to operate tablets and smartphones without removing their protective gear.
Design & Performance
The performance of the AP55 glove is rooted in its technical material composition. By utilising a lightweight yet exceptionally strong mix of HPPE and steel fibres, the glove provides high-level protection without the cumbersome bulk often associated with impact-resistant equipment. The design focuses on ergonomics; the elasticated fit ensures the glove remains secure at the wrist, preventing debris from entering while maintaining a snug profile. The "Sandy" finish on the nitrile coating is particularly effective for those working with smooth or saturated materials, as it provides a micro-suction effect that stabilises the grip. This is a glove designed for longevity, where every element from the reinforced thumb to the stitch-less TPR application is aimed at reducing wear and tear.
Why No Customisation?
As a highly technical piece of Personal Protective Equipment, this glove is designed to meet specific safety certifications, including cut and impact resistance. Any attempt to customise these gloves—whether through embroidery or heat-applied branding—could compromise the integrity of the waterproof nitrile membrane or damage the protective technical fibres. To ensure the glove performs to its tested safety standards and provides the intended protection for your team, we supply this item in its original, certified state.
Use Cases
These gloves are an essential choice for heavy construction, offshore engineering, and waste management sectors. They are particularly valuable for those working in the oil and gas industry or maritime environments where the combination of impact risks, sharp materials, and constant exposure to liquids requires a versatile and high-performance solution.
Why MyWorkwear
With a heritage stretching back to 1976, MyWorkwear has decades of experience in providing the UK workforce with reliable, high-quality safety solutions. Based in Telford, our expertise lies in understanding the specific requirements of British industry and sourcing products that offer genuine protection and value for money.
Practical Advice
To ensure the impact protection is effective, it is vital to select the correct size so that the TPR pods align precisely with the knuckles and finger joints. A glove that is too large will reduce your tactile sensitivity and may cause the impact protection to shift during use. For those working in particularly cold climates, the lightweight nature of these gloves allows for a thin thermal base layer to be worn underneath if required.
Caring for your product
Maintaining the technical properties of your gloves is essential for ensuring they continue to provide the level of protection specified. We recommend cleaning the gloves after use by wiping the exterior with a damp cloth to remove any chemical or abrasive residues.
Avoid using industrial bleach or harsh solvents, as these can degrade the nitrile coating, causing it to lose its waterproof properties and become brittle. When drying, always allow the gloves to air dry naturally away from direct heat sources such as radiators, as excessive heat can damage the bond of the TPR pods and affect the overall fit of the glove.
4.8
